Abaqus Volume II: I–Z Manual do Utilizador descarregar pdf (Página 80)

100

101

INSTANCE

Data line to translate an instance that is not imported from a previous analysis:

First (and only) line:

1. Value of the translation to be applied in the X-direction.

2. Value of the translation to be applied in the Y-direction.

3. Value of the translation to be applied in the Z-direction.

Data lines to translate and/or rotate an instance that is not imported from a previous analysis:

First line:

1. Value of the translation to be applied in the X-direction.

2. Value of the translation to be applied in the Y-direction.

3. Value of the translation to be applied in the Z-direction.

Enter values of zero to apply a pure r otation.

Second line:

1. X-coordinate of point a on the axis of rotation (see Figure 9.19–1).

2. Y-coordinate of point a on the axis of rotation.

3. Z-coordinate of point a on the axis of rotation.

4. X-coordinate of point b on the axis of rotation.

5. Y-coordinate of point b on the axis of rotation.

6. Z-coordinate of point b on the axis of rotation.

7. Angle of rotation about the axis a– b, in degrees.

If both translation and rotation are speciﬁed, translation is applied before rotation.

There are no data lines for an instance that is imported from a previous analysis.

9.19–2

ABAQUS Version 6.1 Module:

ID:

Printed on:

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 627 628

Abaqus Volume II: I–Z Manual do Utilizador Página 80

Comentários a estes Manuais